Wilwood Forged Dynalite Big Brake Front Brake Kit (Hat) Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour les vélos Wilwood Forged Dynalite Big Brake Front Brake Kit (Hat). Wilwood Forged Dynalite Big Brake Front Brake Kit (Hat) User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 8
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
ASSEMBLY INSTRUCTIONS
FOR
DYNAPRO 6 PRO SERIES FRONT HAT KIT
WITH 11.00” DIAMETER VENTED GT ROTOR
1989 - 2005 MAZDA MIATA
PART NUMBER GROUP
140-13380
NOTE: Some cleaners may stain or remove the finish on brake system components. Test the cleaner on a hidden portion
of the component before general use.
WARNING
IT IS THE RESPONSIBILITY OF THE PERSON INSTALLING ANY BRAKE COMPONENT OR KIT TO DETERMINE THE SUITABILITY OF THE
COMPONENT OR KIT FOR THAT PARTICULAR APPLICATION. IF YOU ARE NOT SURE HOW TO SAFELY USE THIS BRAKE COMPONENT OR
KIT, YOU SHOULD NOT INSTALL OR USE IT. DO NOT ASSUME ANYTHING. IMPROPERLY INSTALLED OR MAINTAINED BRAKES ARE
DANGEROUS. IF YOU ARE NOT SURE, GET HELP OR RETURN THE PRODUCT. YOU MAY OBTAIN ADDITIONAL INFORMATION AND
TECHNICAL SUPPORT BY CALLING WILWOOD AT (805) 388-1188, OR VISIT OUR WEB SITE AT WWW.WILWOOD.COM. USE OF WILWOOD
TECHNICAL SUPPORT DOES NOT GUARANTEE PROPER INSTALLATION. YOU, OR THE PERSON WHO DOES THE INSTALLATION MUST
KNOW HOW TO PROPERLY USE THIS PRODUCT. IT IS NOT POSSIBLE OVER THE PHONE TO UNDERSTAND OR FORESEE ALL THE ISSUES
THAT MIGHT ARISE IN YOUR INSTALLATION.
RACING EQUIPMENT AND BRAKES MUST BE MAINTAINED AND SHOULD BE CHECKED REGULARLY FOR FATIGUE, DAMAGE, AND WEAR.
WARNING
DO NOT OPERATE ANY VEHICLE ON UNTESTED BRAKES!
SEE MINIMUM TEST PROCEDURE WITHIN
ALWAYS UTILIZE SAFETY RESTRAINT SYSTEMS AND ALL OTHER AVAILABLE SAFETY EQUIPMENT WHILE OPERATING THE VEHICLE
IMPORTANT • READ THE DISCLAIMER OF WARRANTY INCLUDED IN THE KIT
www.wilwood.com
DISC BRAKES SHOULD ONLY BE INSTALLED BY SOMEONE
EXPERIENCED AND COMPETENT IN THE INSTALLATION AND
MAINTENANCE OF DISC BRAKES
READ ALL WARNINGS
Need Additional Information?
Use Your SmartPhone and
Jump to Our Technical Tips
Section on Our Web Site.
Vue de la page 0
1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - READ ALL WARNINGS

ASSEMBLY INSTRUCTIONSFORDYNAPRO 6 PRO SERIES FRONT HAT KITWITH 11.00” DIAMETER VENTED GT ROTOR1989 - 2005 MAZDA MIATAPART NUMBER GROUP140-13380NOTE: S

Page 2 - Photographic Tip

Exploded Assembly Diagram81114121013567194236P I S6PISTO NTONFigure 1. Typical Installation ConfigurationImportant Notice - Read This FirstBefore any

Page 3 - Parts List

Parts List1234567891010A1112131424442222122244161250-11651230-9664240-1934300-11652300-11653160-12892170-11682300-7316230-11935120-10134/35120-10134/3

Page 4 - Assembly Instructions

Assembly Instructions (numbers in parenthesis refer to the parts list and Figure 1 on the preceding pages): CAUTION: All mountingbolts must fully enga

Page 5

Assembly Instructions (Continued)•NOTE: OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inletfitting is a 1/8-27

Page 6

Page 6Additional Information and Recommendations•Fill and bleed the new system with Wilwood Hi-Temp° 570 grade fluid or higher. For severe braking or

Page 7 - Pad and Rotor Bedding

Page 7Brake Testing• Make sure pedal is firm: Hold firm pressure on pedal for several minutes, it should remain in position without sinking. If pedal

Page 8 - Associated Components

DS-1022 REV DATE: 10-29-13260-1874260-1876260-8419290-0632290-6209340-1285340-1287260-6764260-6765260-6766260-4893250-2406260-8555260-8556350-203822

Commentaires sur ces manuels

Pas de commentaire